MikroTik RouterBOARD hAP AC Lite RB952UI-5AC2ND with Tower Case
The MikroTik RouterBOARD hAP AC Lite RB952UI-5AC2ND is a compact and versatile router with 5 Ethernet ports and built-in 802.11ac Dual-Band wireless. Equipped with a 600MHz CPU, 64MB RAM, and a USB port, this preconfigured device is ideal for hard-to-reach locations. Includes a Level 4 License for access to features like dynamic routing, hotspot, and MPLS. Tower Case enclosure offers easy installation options and versatile power capabilities.
Tech Specs
Click here for the RB952UI-5AC2ND datasheet.
| Device Specifications | |
|---|---|
| Product code | RB952Ui-5ac2nD-TC |
| Architecture | MIPSBE |
| CPU | QCA9531 |
| CPU core count | 1 |
| CPU nominal frequency | 650 MHz |
| Switch chip model | QCA9531 |
| Dimensions | 34 x 119 x 98 mm |
| RouterOS license | 4 |
| Operating System | RouterOS |
| Size of RAM | 64 MB |
| Storage size | 16 MB |
| Storage type | FLASH |
| MTBF | Approximately 100'000 hours at 25°C |
| Tested ambient temperature | -30°C to 70°C |
| Suggested price | $59.00 |
| Wireless Capabilities | |
| 2.4 GHz Max data rate | 300 Mbit/s |
| 2.4 GHz number of chains | 2 |
| 2.4 GHz standards | 802.11b/g/n |
| Antenna gain dBi (2.4 GHz) | 1.5 |
| 2.4 GHz chip model | QCA9531 |
| 2.4 GHz generation | Wi-Fi 4 |
| 5 GHz Max data rate | 433 Mbit/s |
| 5 GHz number of chains | 1 |
| 5 GHz standards | 802.11a/n/ac |
| Antenna gain dBi (5 GHz) | 2 |
| 5 GHz chip model | QCA9887 |
| 5 GHz generation | Wi-Fi 5 |
| WiFi speed | AC750 |
| Ethernet | |
| 10/100 Ethernet ports | 5 |
| Peripherals | |
| Number of USB ports | 1 |
| USB Power Reset | Yes |
| USB slot type | USB type A |
| Max USB current (A) | 1 |
| Powering | |
| Number of DC inputs | 2 (DC jack, PoE-IN) |
| DC jack input Voltage | 10-28 V |
| Max power consumption | 20 W Without attachments: 8 W |
| PoE in | Passive PoE Input Voltage: 10-28 V |
| Cooling type | Passive |
| PoE-out | |
| PoE-out ports | Ether5 |
| PoE out | Passive PoE |
| Low voltage PoE-Out current limit | 500 mA |
| Max total out (A) | 500 mA |
| Certification & Approvals | |
| Certification | CE, FCC, IC, EAC, ROHS |
| IP | IP20 |
| Wireless Specifications | |
| 2.4 GHz Transmit (dBm) / Receive Sensitivity | 1 MBit/s: 22 / -96 11 MBit/s: 22 / -89 6 MBit/s: 20 / -93 54 MBit/s: 18 / -74 MCS0: 20 / -93 MCS7: 16 / -71 |
| 5 GHz Transmit (dBm) / Receive Sensitivity | 6 MBit/s: 23 / -93 54 MBit/s: 20 / -75 MCS0: 23 / -93 MCS7: 19 / -71 MCS9: 16 / -63 |
FAQs
Q: What is the MikroTik RB952Ui‑5ac2nD used for?
A: The RB952Ui‑5ac2nD is an indoor access point and router designed for homes or small offices. It provides dual‑band Wi‑Fi on 2.4 GHz & 5 GHz and wired network connectivity via five 10/100 Mbps Ethernet ports.
Q: What wireless standards and speeds does the RB952Ui‑5ac2nD support?
A: It supports IEEE 802.11b/g/n on 2.4 GHz (dual‑chain) and 802.11a/n/ac on 5 GHz (single‑chain), achieving up to approximately 300 Mbps on 2.4 GHz and ~433 Mbps on 5 GHz in ideal conditions.
Q: How is the RB952Ui‑5ac2nD powered and what PoE features does it offer?
A: The device supports passive PoE input (10‑28 V DC) via jack or PoE‑in, and offers passive PoE‑out on its fifth Ethernet port, allowing it to power another device (with a maximum load limit of 500 mA).
Q: What are the key hardware and management features of the RB952Ui‑5ac2nD?
A: It includes a 650 MHz CPU, 64 MB RAM, 16 MB flash, five 10/100 Mbps LAN ports, USB‑A port (for 3G/4G modem or other uses), a sleek desktop/tower case, and ships with RouterOS license Level 4 for advanced configuration.
Q: Can the RB952Ui‑5ac2nD be integrated into larger networks and managed centrally?
A: Yes. It supports MikroTik’s CAPsMAN or standard RouterOS management, enabling centralised configuration, monitoring and integration into broader Wi‑Fi infrastructures for offices or managed networks.
Resources
More Images
MikroTik RouterBOARD hAP AC Lite RB952UI-5AC2ND with Tower Case
The MikroTik RouterBOARD hAP AC Lite RB952UI-5AC2ND is a compact and versatile router with 5 Ethernet ports and built-in 802.11ac Dual-Band wireless. Equipped with a 600MHz CPU, 64MB RAM, and a USB port, this preconfigured device is ideal for hard-to-reach locations. Includes a Level 4 License for access to features like dynamic routing, hotspot, and MPLS. Tower Case enclosure offers easy installation options and versatile power capabilities.
Tech Specs
Click here for the RB952UI-5AC2ND datasheet.
| Device Specifications | |
|---|---|
| Product code | RB952Ui-5ac2nD-TC |
| Architecture | MIPSBE |
| CPU | QCA9531 |
| CPU core count | 1 |
| CPU nominal frequency | 650 MHz |
| Switch chip model | QCA9531 |
| Dimensions | 34 x 119 x 98 mm |
| RouterOS license | 4 |
| Operating System | RouterOS |
| Size of RAM | 64 MB |
| Storage size | 16 MB |
| Storage type | FLASH |
| MTBF | Approximately 100'000 hours at 25°C |
| Tested ambient temperature | -30°C to 70°C |
| Suggested price | $59.00 |
| Wireless Capabilities | |
| 2.4 GHz Max data rate | 300 Mbit/s |
| 2.4 GHz number of chains | 2 |
| 2.4 GHz standards | 802.11b/g/n |
| Antenna gain dBi (2.4 GHz) | 1.5 |
| 2.4 GHz chip model | QCA9531 |
| 2.4 GHz generation | Wi-Fi 4 |
| 5 GHz Max data rate | 433 Mbit/s |
| 5 GHz number of chains | 1 |
| 5 GHz standards | 802.11a/n/ac |
| Antenna gain dBi (5 GHz) | 2 |
| 5 GHz chip model | QCA9887 |
| 5 GHz generation | Wi-Fi 5 |
| WiFi speed | AC750 |
| Ethernet | |
| 10/100 Ethernet ports | 5 |
| Peripherals | |
| Number of USB ports | 1 |
| USB Power Reset | Yes |
| USB slot type | USB type A |
| Max USB current (A) | 1 |
| Powering | |
| Number of DC inputs | 2 (DC jack, PoE-IN) |
| DC jack input Voltage | 10-28 V |
| Max power consumption | 20 W Without attachments: 8 W |
| PoE in | Passive PoE Input Voltage: 10-28 V |
| Cooling type | Passive |
| PoE-out | |
| PoE-out ports | Ether5 |
| PoE out | Passive PoE |
| Low voltage PoE-Out current limit | 500 mA |
| Max total out (A) | 500 mA |
| Certification & Approvals | |
| Certification | CE, FCC, IC, EAC, ROHS |
| IP | IP20 |
| Wireless Specifications | |
| 2.4 GHz Transmit (dBm) / Receive Sensitivity | 1 MBit/s: 22 / -96 11 MBit/s: 22 / -89 6 MBit/s: 20 / -93 54 MBit/s: 18 / -74 MCS0: 20 / -93 MCS7: 16 / -71 |
| 5 GHz Transmit (dBm) / Receive Sensitivity | 6 MBit/s: 23 / -93 54 MBit/s: 20 / -75 MCS0: 23 / -93 MCS7: 19 / -71 MCS9: 16 / -63 |
FAQs
Q: What is the MikroTik RB952Ui‑5ac2nD used for?
A: The RB952Ui‑5ac2nD is an indoor access point and router designed for homes or small offices. It provides dual‑band Wi‑Fi on 2.4 GHz & 5 GHz and wired network connectivity via five 10/100 Mbps Ethernet ports.
Q: What wireless standards and speeds does the RB952Ui‑5ac2nD support?
A: It supports IEEE 802.11b/g/n on 2.4 GHz (dual‑chain) and 802.11a/n/ac on 5 GHz (single‑chain), achieving up to approximately 300 Mbps on 2.4 GHz and ~433 Mbps on 5 GHz in ideal conditions.
Q: How is the RB952Ui‑5ac2nD powered and what PoE features does it offer?
A: The device supports passive PoE input (10‑28 V DC) via jack or PoE‑in, and offers passive PoE‑out on its fifth Ethernet port, allowing it to power another device (with a maximum load limit of 500 mA).
Q: What are the key hardware and management features of the RB952Ui‑5ac2nD?
A: It includes a 650 MHz CPU, 64 MB RAM, 16 MB flash, five 10/100 Mbps LAN ports, USB‑A port (for 3G/4G modem or other uses), a sleek desktop/tower case, and ships with RouterOS license Level 4 for advanced configuration.
Q: Can the RB952Ui‑5ac2nD be integrated into larger networks and managed centrally?
A: Yes. It supports MikroTik’s CAPsMAN or standard RouterOS management, enabling centralised configuration, monitoring and integration into broader Wi‑Fi infrastructures for offices or managed networks.
Resources
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The MikroTik RouterBOARD hAP AC Lite RB952UI-5AC2ND is a compact and versatile router with 5 Ethernet ports and built-in 802.11ac Dual-Band wireless. Equipped with a 600MHz CPU, 64MB RAM, and a USB port, this preconfigured device is ideal for hard-to-reach locations. Includes a Level 4 License for access to features like dynamic routing, hotspot, and MPLS. Tower Case enclosure offers easy installation options and versatile power capabilities.
Tech Specs
Click here for the RB952UI-5AC2ND datasheet.
| Device Specifications | |
|---|---|
| Product code | RB952Ui-5ac2nD-TC |
| Architecture | MIPSBE |
| CPU | QCA9531 |
| CPU core count | 1 |
| CPU nominal frequency | 650 MHz |
| Switch chip model | QCA9531 |
| Dimensions | 34 x 119 x 98 mm |
| RouterOS license | 4 |
| Operating System | RouterOS |
| Size of RAM | 64 MB |
| Storage size | 16 MB |
| Storage type | FLASH |
| MTBF | Approximately 100'000 hours at 25°C |
| Tested ambient temperature | -30°C to 70°C |
| Suggested price | $59.00 |
| Wireless Capabilities | |
| 2.4 GHz Max data rate | 300 Mbit/s |
| 2.4 GHz number of chains | 2 |
| 2.4 GHz standards | 802.11b/g/n |
| Antenna gain dBi (2.4 GHz) | 1.5 |
| 2.4 GHz chip model | QCA9531 |
| 2.4 GHz generation | Wi-Fi 4 |
| 5 GHz Max data rate | 433 Mbit/s |
| 5 GHz number of chains | 1 |
| 5 GHz standards | 802.11a/n/ac |
| Antenna gain dBi (5 GHz) | 2 |
| 5 GHz chip model | QCA9887 |
| 5 GHz generation | Wi-Fi 5 |
| WiFi speed | AC750 |
| Ethernet | |
| 10/100 Ethernet ports | 5 |
| Peripherals | |
| Number of USB ports | 1 |
| USB Power Reset | Yes |
| USB slot type | USB type A |
| Max USB current (A) | 1 |
| Powering | |
| Number of DC inputs | 2 (DC jack, PoE-IN) |
| DC jack input Voltage | 10-28 V |
| Max power consumption | 20 W Without attachments: 8 W |
| PoE in | Passive PoE Input Voltage: 10-28 V |
| Cooling type | Passive |
| PoE-out | |
| PoE-out ports | Ether5 |
| PoE out | Passive PoE |
| Low voltage PoE-Out current limit | 500 mA |
| Max total out (A) | 500 mA |
| Certification & Approvals | |
| Certification | CE, FCC, IC, EAC, ROHS |
| IP | IP20 |
| Wireless Specifications | |
| 2.4 GHz Transmit (dBm) / Receive Sensitivity | 1 MBit/s: 22 / -96 11 MBit/s: 22 / -89 6 MBit/s: 20 / -93 54 MBit/s: 18 / -74 MCS0: 20 / -93 MCS7: 16 / -71 |
| 5 GHz Transmit (dBm) / Receive Sensitivity | 6 MBit/s: 23 / -93 54 MBit/s: 20 / -75 MCS0: 23 / -93 MCS7: 19 / -71 MCS9: 16 / -63 |
FAQs
Q: What is the MikroTik RB952Ui‑5ac2nD used for?
A: The RB952Ui‑5ac2nD is an indoor access point and router designed for homes or small offices. It provides dual‑band Wi‑Fi on 2.4 GHz & 5 GHz and wired network connectivity via five 10/100 Mbps Ethernet ports.
Q: What wireless standards and speeds does the RB952Ui‑5ac2nD support?
A: It supports IEEE 802.11b/g/n on 2.4 GHz (dual‑chain) and 802.11a/n/ac on 5 GHz (single‑chain), achieving up to approximately 300 Mbps on 2.4 GHz and ~433 Mbps on 5 GHz in ideal conditions.
Q: How is the RB952Ui‑5ac2nD powered and what PoE features does it offer?
A: The device supports passive PoE input (10‑28 V DC) via jack or PoE‑in, and offers passive PoE‑out on its fifth Ethernet port, allowing it to power another device (with a maximum load limit of 500 mA).
Q: What are the key hardware and management features of the RB952Ui‑5ac2nD?
A: It includes a 650 MHz CPU, 64 MB RAM, 16 MB flash, five 10/100 Mbps LAN ports, USB‑A port (for 3G/4G modem or other uses), a sleek desktop/tower case, and ships with RouterOS license Level 4 for advanced configuration.
Q: Can the RB952Ui‑5ac2nD be integrated into larger networks and managed centrally?
A: Yes. It supports MikroTik’s CAPsMAN or standard RouterOS management, enabling centralised configuration, monitoring and integration into broader Wi‑Fi infrastructures for offices or managed networks.
